1.

Loosen 2 screws bellow burners.

2.

Note: If screws are to tight and won’t loosen-up, pry burner up with screwdriver.

3.

Remove old screws spray DW-40 on them and let it penetrate a few minutes, this will make it easier to remove, if still wont come off use a pair of locking pliers or vice grips

4.

Attach small burner bracket supplied with new burners using the 2 new screws provided, Per burner.

5.

Install new burners, make sure burner shaft inserts over gas valve orifice. And attach to bracket with screw provided with new burner.

If you need further assistance please call 888-287-0735 for technical support